Measurement

Set Ascending Direction

Displaying 1-6 out of 19 products

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. WDS pressure/vacuum adaptor kit

    WDS pressure/vacuum adaptor kit

    The Pressure and Vacuum Adaptor Kit consists of the Fuel Hose Assembly (FHA) and adapters for non-fuel vaccum testing. The FHA attaches to the vehicles fuel rail Shrader valve or to a T-adapter Schrad...
    £240.00
    (EX TAX + Freight )
  2. IDS (7 meter long) PC Ethernet-USB Host Cable (VCM or VMM)

    IDS (7 meter long) PC Ethernet-USB Host Cable (VCM or VMM)

    The IDS 7m PC Ethernet-USB Host Cable is used to connect the VMM to the USB port on the PC. This cable can also be used to connect the Vehicle Communication (VCM) to the PC at the USB port.
    £245.00
    (EX TAX + Freight )
  3. IDS (4 meter long) PC Ethernet-USB Host Cable (VCM or VMM)

    IDS (4 meter long) PC Ethernet-USB Host Cable (VCM or VMM)

    The IDS 4m PC Ethernet-USB Host Cable is used to connect the VMM to the USB port on the PC. This cable can also be used to connect the Vehicle Communication (VCM) to the PC at the USB port.
    £245.00
    (EX TAX + Freight )
  4. 500 amp Current Clamp

    500 amp Current Clamp

    The VMM 50 Amp Current Probe is used to measure currents (500 Amps Max) by clipping over a vehicle wire to be measured.
    £515.00
    (EX TAX + Freight )
  5. 50 amp Current Clamp

    50 amp Current Clamp

    The VMM 50 Amp Current Probe is used to measure currents (50 Amps Max) by clipping over a vehicle wire to be measured.
    £515.00
    (EX TAX + Freight )
  6. COP (Coil on plug) Clip (x4)

    COP (Coil on plug) Clip (x4)

    The COP Clips are used with the VMM Secondary Ignition Transducer cable to measure ignition signals on vehicles that use Coil On Plug (COP) ignition systems.
    £185.00
    (EX TAX + Freight )

Set Ascending Direction

Displaying 1-6 out of 19 products

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4